Nammco Machine | Levee Maintenance Tools | Switch Plows | Cotton Stripper Parts 
Laser Drag Finishing Scraper | Hard Parts | Lake Pumps | Contact Us | HomeLubbock Gasket 


CLICK IMAGE TO ENLARGE

 newfamily.jpg (6602 bytes)

NEW NAMMCO FAMILY OF MULTI-PURPOSE ENERGY-CONSERVING PUMPS

Three versatile models. Each one can be float-mounted. Job-engineered to pump steady delivery. Chose 50 to 400 GPM. pump capacity depending on accessories attached. Energy- economical

combustionwater.jpg (6682 bytes)

COMBUSTION ENGINE FLOATING MODEL
.
 
Push it into the water and watch it float. Built in 4 and 8 inch sizes. From 400 to 2000 GPM. Versatile

combustiond.jpg (7472 bytes)

economicalchamp.jpg (5703 bytes)

ECONOMICAL CHAMP

This on does away with expensive frame work. A slant pump unit, it is one of our most popular models. It is economical to install because no special installing equipment is required. It is also equipped with On-Off electrical switches for safer, easier operation. We manufacture it in 4, 8, 12, 14 or 20 foot lengths.

floatmodel.jpg (6787 bytes)

NAMMCO FLOAT MODEL

4 or 8 inch models in an adaptation that includes styrofoam pontoons and a connection a for rubber hose or aluminum pipe. The steady NAMMCO FLOAT can be equipped for any other model. An all-steel frame permits launching and docking. Transporting assembly and disassembly is easy

portable.jpg (7497 bytes)

KMP PORTABLE and STATIONARY UNITS

In the portable model you get the same constant-prime feature. The stationary unit is of permanent design. Note how it can be positioned on a very steep pit or lake bank.

portablebooster.jpg (6876 bytes)

KMP PORTABLE BOOSTER

Here is a great unit for boosting pressure anywhere along the system. note how joints are machined to fit aluminum pipe couplers for fast easy installation

HIGHLY MOBILE - GREATER CAPACITY RANGE  
ELECTRIC & GASOLINE DRIVE

hollowshaft.jpg (4646 bytes)

NAMMCO HOLLOW SHAFT ELECTRIC 
FLOAT MODEL


A new adaptation that includes styrofoam pontoons and a connection for rubber hose or aluminum pipe. Vertical  hollow shaft, 15 to 75 HP electric drive design. 4 or 8 inch inch models. The all new NAMMCO FLOAT can be equipped for any other model. An all-steel framework permits launching and docking. easy transportation, assembly and disassembly.

303lakepump.jpg (6011 bytes)

NAMMCO 303 LAKE PUMP

One of the simplest pumps yet designed. Primes continuously and is practically trouble-free. Three models:
1 1/2 HP electric 
7 1/2 HP electric 
8 HP gas powered
Use it on floats or lift it out and set it on the bottom in a shallow water.

trailertank.jpg (6032 bytes)

NAMMCO TRAILER 
TANK PUMP

A new, go-places model. It can be equipped with a 3 HP gasoline or 1 1/2 HP electric power drive. Easily installed. Simple and minimal maintenance. An ideal transfer pump. Rates from 100 to 300 GPM

1408.jpg (14319 bytes)

NAMMCO 1408
is our finest 8 inch lake pump for high efficiency and high capacity pumping. It will deliver 1200 GPM with NAMMCO Standard Impeller. It will not break prime and will pump available water quickly and efficiently. It is powered with a 292
6-cylinder engine.

anaddfeature.jpg (16158 bytes)

NAMMCO 1408 
ADDED FEATURE

of this pump is a safety switch that automatically shuts off the pump when water supply is depleted. The NAMMCO PUMP will save you time, worry, labor and money

mounted.jpg (14133 bytes)

NAMMCO 1408
MOUNTED ON AN

auto steering chassis, trails excellently at 60 MPH. It can be put into operation in minutes, going to work for you in saving your valuable surface water. Its a big pump for a big job.

 

Nammco Machine | Levee Maintenance Tools | Switch Plows | Cotton Stripper Parts 
Hard Parts | Lake Pumps | Contact Us | HomeLubbock Gasket 

e-mail Jay with questions or comments about this web site.  
Site Design, Graphics and Writing Copyright©
2000-2001 NAMMCO. All Rights Reserved.
All other copyrights held by their respective owners.